The Reflex C is suited to low output moving coil (MC) with output in the region of 0.2 – 1.0 mV (ref 1kHz at 5cm/sec)

Cartridges having lower outputs may be used if you accept the risk of hearing more hiss than you may be comfortable with.

Your amplifier’s volume control is intended to be set to give you the loudness you want and should be adjusted accordingly. With the lowest output cartridges you will need to turn the volume control higher than you would use with other sources such as a CD player.

Item	Measurement
Input and output connectors	RCA/phono sockets, hard gold plated
Input sensitivity range	0.2mV to 1.0mV (recommended)
Output range (for above inputs)	252mV to 1,260mV
Maximum input	3.9mV rms
Maximum output	4.914V rms
Gain	62dB (1,260) at 1kHz
Input impedance	100 Ω or 1k Ω to order
Output impedance (driving impedance)	1k Ohm (will drive 10k Ohms and above)
Noise at output	-62dB CCIR Quasi-peak 20Hz to 20kHz
Distortion	typically 0.02%
RIAA accuracy	< 0.5dB
Frequency response	20Hz – 100kHz (“flat”, corrected to RIAA)
Channel balance	0.2dB
Channel separation	60dB
Power supply	remotely powered using PSU1 linear power supply
Size (approx.)	W: 107 x H: 50 x D: 180 (mm) inc. jacks