turntable-dual-armboard-exchange-9.5inches-resolution-sovereign

9.5" Dual Armboard exchange (Resolution and Sovereign)

Tonearm-mounting-12-inch-standard-subchassis-resolution-sovereign

12" Tonearm mounting exchange for standard sub-chassis (Resolution and Sovereign)

Belts - flat and round for all turntables

The humble turntable belt seems an unlikely candidate for yielding a significant upgrade. It is a revelation to users, how much the Origin Live Upgrade belt affects the sound. These belts contain a very special compound mix not found in normal belts. The performance increase over all conventional flat belts is dramatic due to increased grip and reduced stretch. The high internal damping also results in reduced transmission of motor vibration.

Money back guarantee. Please specify length when ordering.

£33.00

Out of stock

SKU
TBHF

We manufacture flat belts from a special material that produces the most superior results of any material we have tried ( and there are a lot). These belts are not only remarkable in producing noticeably better sound, especially in deeper and more precise bass but they also eliminate static problems that sometimes occur on decks. To work out the length you need, use one of 2 methods. Belt lengths are specified using the circumference which is the TOTAL length of the belt.

  1. To measure the circumference you can take your existing belt and lay it flat against a ruler - measure the length and then double the measurement - this will give you the circumference (i.e Total length). If you measure the belt this way please tell us "measured from belt" when you order. This can be noted in the ordering online process when you come to a box that says "custom length".
  2. Alternatively you can use a length of thread or string looped round the sub-platter (or platter if belt runs on this) and pulley. This mimics the belt path - Measure the thread length to give the circumference of the belt i.e the total length of the belt. If you measure the belt this way please tell us "measured from thread" when you order. This can be noted in the ordering online process when you come to a box that says "custom length"

Note all belts are approx 4.7mm deep (+ or - 0.3mm) and 0.7mm thick - this seems to work well with almost all decks and fit most pulleys for flat belts.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account