Phono Box‚ Project Box

Phono Box USB V‚ Project Box

The same great quality performance as our highly respected Phono Box II, except now there's the addition of a high-quality A/D converter!
Now at the same time as listening to your music through your traditional hi-fi, you can record your vinyl to a computer or laptop, which will later allow you to transfer your music to your iPod or other digital music source. The front-facing attenuator on the unit allows for full control over the gain of your USB signal; this can help avoid distorted and/or 'clipping' recordings. This unit also benefits from a Line input, allowing you to record Line-Level sources, such as a tape deck, to your computer as well.

Availability: In stock

Key Features:
Metal case shields the electronics from vibrational and electromagnetic interference. 
Small size allows installation close to record player. 
Special low-noise ICs used. 
Optimal channel separation through dual-mono circuitry. 
Gold plated RCA connection sockets. 
Outboard power supply included. 
Amplification and RIAA equalisation for MM and MC cartridges 
Digitalisation of analog signals for recording direct to disk via USB with suitable recording programs 
Automatic recognition, without additional driver, by standard PC 
Runs on Windows® and Mac OS® operating systems 
Phono MM/MC selection switch located at the rear of the unit

Technical Data:
Input Impedance: MM - 47kΩ / 120pF MC - 100Ω / 120pF
Gain: MM - 40dB MC - 60dB
Output Voltage Typically: 300mV / 1kHz @ 3mV / 1kHz (MM Input) 300mV / 1kHz @ 0.3mV / 1kHz (MC Input)
Gain (Line Input): 11dB Max. Output: 9.5V (1kHz)
Noise Floor: MM - 86dB (94dB - A Weighted) MC - 68dB (75dB - A Weighted)
THD: MM - 0.01% MC - 0.05%
RIAA Equalisation Curve Accuracy: 20Hz - 20kHz / max. 0.5dB
A/D Converter: Burr Brown PCM2904 16-Bit Delta Sigma
Sampling Rates: 32, 44.1 and 48kHz USB
Output: Digital Serial Data Protocol USB 1.1
Operating Systems: Windows XP, Vista, 7 Mac OS
Inputs: Phono - 1 Pair RCA Phono Sockets Line - 3-Pole 3.5mm Coaxial Jack
Output: 1 Pair RCA Phono Sockets
THD: 0.005%
Noise Floor: 96dB
Dynamic Range: 93dB
Outboard Power Supply: 18V/500mA DC
Power Consumption: 100mA DC
Dimensions (WxHxD): 103 x 36 x 104mm 103 x 36 x 115mm (Including Sockets)
Weight: 580g (Without Power Supply)

Please note: You will need interconnect cables to connect this phono stage to your amplifier.

Whilst every effort is made to support software issues, we cannot always guarantee compatibility and functionality with some operating systems and regret that we are unable to support MAC formats.  We also suggest that this product may be unsuitable for use with Linux systems.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account