Frequency range 10 Hz to 50 kHz
Channel separation 30 dB or better at 1 kHz
Cantilever system Solid boron rod w/ Namiki microridge stylus (2.5 x 75 micrometres profile)
Coils Six Ns high-purity copper
Internal impedance 8.2 Ohms
Output voltage 0.6 mV (5.0 cm/second, zero to peak, 45 degrees)
Cartridge weight 7.3 g without stylus cover
Compliance Approx 12 x 10-6 cm/dyne at 100 Hz
Recommended tracking force 1.7 to 1.8 g (1.75 g preferred)
Recommended load into phono stage/head amp 91 Ohms to 47 kOhms (best value determined by listening)
Recommended load into step-up transformer 5 to 15 Ohms

Frequency range 10 Hz to 50 kHz
Channel separation 35 dB or better at 1 kHz
Cantilever system Solid boron rod with Lyra-designed long footprint line-contact stylus and one-point suspension, directly mounted to cartridge body
Coils Six Ns high-purity copper
Internal impedance 5.4 Ohms
Cartridge weight 8.8 g without stylus cover
Compliance Approx 12 x 10-6 cm/dyne at 100 Hz
Recommended tracking force 1.6 to 1.75 g
Recommended load into phono stage/head amp 91 Ohms to 47 kOhms (best value determined by listening)

Designer: Jonathan Carr
Builder: Yoshinori Mishima
Type: Medium weight, medium compliance, low-impedance moving coil cartridge
Stylus: Lyra-designed long-footprint variable-radius line-contact nude diamond (3μm× 70μm), slot-mounted
Cantilever system: Diamond-coated solid boron rod with short one-point wire suspension, directly mounted into cartridge body via high-pressure knife-edge system
Coils: single layer, 6 N high-purity copper, chemically-purified high purity iron cross-shaped former, 1.52 ohm self impedance, 1.9μH inductance
Output voltage: 0.25mV@5 cm/sec., zero to peak, 45 degrees (CBS test record, other test records may alter results)
Frequency range: 10 Hz〜50 kHz
Channel separation: 35 dB or better at 1 kHz
Compliance: Approx. 12× 10 cm/dyne at 100 Hz
Vertical tracking angle: 20 degrees
Cartridge body: Multi-material (titanium, duralumin, bronze, stainless steel) self-clamping construction with reduced-surface higher-pressure headshell contact area, predominately non-parallel shaping, phase-interference resonance-controlling mechanisms, and body threaded directly for mounting screws
Cartridge mounting screws: 2.6 mm 0.45 pitch JIS standard
Cartridge weight (without stylus cover): 9.2g
Distance from mounting holes to stylus tip: 9.52mm
Recommended tracking force: 1.68〜1.78g (1.72 g recommended)
Recommended load directly into MC phono input: Determine by listening.
Recommended load via step-up transformer: 1〜10ohm (connect step-up transformer’s output to 10kohm〜47kohm MM-level RIAA input, preferably via short, low-capacitance cable)
Recommended tonearm: High-quality pivoted or linear (tangential) tonearm with rigid bearing(s), adjustable anti-skating force, preferably VTA adjustment

Type: Medium weight, medium compliance, low-impedance moving coil cartridge
Stylus: Lyra-designed long-footprint variable-radius line-contact nude diamond (3μm×70μm), slot-mounted
Cantilever system: Diamond-coated solid boron rod with short one-point wire suspension, directly mounted into cartridge body via high-pressure knife-edge system
Coils: 2-layer deep, 6 N high-purity copper, chemically-purified high-purity iron cross-shaped former, 4.2 ohm self-impedance, 11μH inductance
Output voltage: 0.56 mV@5 cm/sec., zero to peak, 45 degrees (CBS test record, other test records may alter results)
Frequency range: 10 Hz~50 kHz
Channel separation: 35 dB or better at 1 kHz
Compliance: Approx. 12×10 cm/dyne at 100 Hz
Vertical tracking angle: 20 degrees
Cartridge mounting screws: 2.6 mm 0.45 pitch JIS standard
Cartridge weight (without stylus cover): 9.2g
Distance from mounting holes to stylus tip: 9.5 mm
Recommended tracking force: 1.68~1.78g (1.72 g recommended)

Technical Specifications

Designer: Jonathan Carr,   Builder: Yoshinori Mishima
Type: Medium weight, medium compliance, low-impedance moving coil cartridge

Recommended Tracking Force: 1.65 – 1.75g (1.72g recommended)

Recommended Load Directly into MC Phono Input: 104ohm – 887ohm (determine by listening, or follow detailed guidelines in user manual)

Recommended Load via Step-Up Transformer: 5 – 15ohm (Step-up transformer’s output must be connected to 10kohm – 47kohm MM-level RIAA input, prefereably via short, low-capacitance cable)

Stylus: Lyra-designed long-footprint variable-radio line-contact nude diamond, slot-mounted

Cantilever System: Diamond-coated solid boron rod with short one-point wire suspension, directly mounted into cartridge body via high-pressure knife-edge system

Coils: 2-layer deed, 6N high-purity copper, cross-shaped chemically-purified high-purity iron former

Self-impedance 4.2ohm

 Inductance: 11uH

Output Voltage: 0.56mV@5cm/sec., zero to peak, 45 degrees (CBS test record, other test records may alter results)

Frequency Range: 10Hz – 50kHz

Channel Separation: 35dB or better at 1kHz

Compliance: Approx. 12 x 10-6cm/dyne at 100Hz

Vertical Tracking Angle: 20 degrees

Cartridge Body: One-piece machining from solid titanium billet, with reduced-surface higher-pressure headshell contact area, predominately non-parallel and asymmetrical shaping, phase-interference resonance-controlling mechanism, and body threaded directly for mounting screws.

Cartridge Mounting Screws: 2.6mm 0.45 pitch JIS standard

Distance From Mounting Holes To Stylus Tip: 9.5mm

Cartridge Weight (without stylus cover): 11.6g

Recommended Tonearms: High-quality pivoted or linear (tangential) tonearms with rigid bearing(s), adjustable anti-skating force, preferably VTA adjustment