Turntable Spares
Spares for Origin Live Turntables
-
-
Origin Live Speed StrobeA spare strobe disc to measure the speed of your turntable. Comes as standard with all motor kits.
£8.00 -
-
-
Wall Wart Options for all countriesWe will send the correct Wallwart to suit the electrical mains supply in your country when you select the option "I'm not sure what my mains supply is"
£25.50 -
Origin Live Short PulleyOrigin Live Short Pulley 10mm overall height
This pulley is used on some early Origin Live turntables. Please check the height of this pulley against the one you currently own.
£27.50 -
-
Turntable Belt 985mm for Origin Live MK2, MK3, MK4 TurntablesSpare upgrade belt for all MK2, MK3, MK4 Origin Live turntables. 985mm long.
£35.00 -
Upgrade Platter Mat (1mm Thick)Probably the best low cost, high value upgrade you can make to your turntable regardless of its origin. It adds transparency, dynamics and bass depth. At only 1mm thick it’s easy to install without causing problems. The diameter is 296mm to fit inside the lip of decks such as the LP12 .
£46.00 -
-
Round Upgrade TransformerA special fully balanced upgrade transformer is offered as an option for all older Origin Live turntables ( which only use a Wallwart) and dc motor kits. This features an extremely advanced, purpose-designed transformer housed in an outboard enclosure.£160.00 -
Motor Drive Advanced Control Box AloneAdvanced Switch Box Alone - for DC motor kits and Origin Live MK1 or Resolution Classic decks - easy replacement for lost or non-functioning boxes.£195.00 -
DC200 Motor Alone (LSC Only, Includes Pulley)DC200 Turntable Motor Option - This motor is only suitable for Origin Live Turntables which have the Light speed controller. It nearly doubles the torque of the DC100 with smoother operation to yield significant improvement.£315.00 -
Fully Balanced Upgrade Transformer AloneBalanced Upgrade Transformer for: 230V Europe, 230V UK, or 110V£400.00 -
DC300 Motor Alone (for LSC only, Includes Pulley)DC300 Turntable Motor Option - This motor is only suitable for Origin Live Turntables which have the Light speed controller. The DC300 is a very high grade motor that yields huge benefits in sound quality.£425.00 -
Motor Drive Ultra Control Box AloneIncreased dynamics, bass weight and power are just a few of the major benefits to be gained with the Ultra upgrade.£465.00 -
12" Tonearm mounting exchange for standard sub-chassis (Aurora and Calypso)Origin Live 12" Subchassis exchange for standard sub-chassis.
(Tonearm shown for illustration only)
If you wish to have the 12 inch sub-chassis armboard option then please return your old subchassis WITH bearing attached to us to exchange the sub-chassis to dual armboard type.
We are sorry but cannot simply send out a new subchassis as alignment, fit up and levels are critical and something only we can carry out.
£530.00 -
9.5" Dual Armboard Exchange (Aurora or Calypso)Origin Live Dual Armboard
(Tonearm shown for illustration only)
If you wish to have the dual armboard option then please return your old subchassis WITH bearing attached to us to exchange the sub-chassis to dual armboard type.
We are sorry but cannot simply send out a new subchassis as alignment, fit up and levels are critical and something only we can carry out.
£575.00 -
9.5" Dual Armboard exchange (Resolution and Sovereign)Dual Armboard exchange (Resolution and Sovereign)
(Tonearm shown for illustration only)If you wish to have the dual armboard option then please return your old subchassis WITH bearing and armboards attached to us to exchange the sub-chassis to dual armboard type.
We are sorry but cannot simply send out a new subchassis as alignment, fit up and levels are critical and something only we can carry out.
£770.00
