- Category
Hi Fi Accessories
Hi Fi Accessories
- L'Art Du Son Cleaning Fluid
This is THE record cleaning fluid to use for significant performance increase and to avoid damage to your records - "I strongly recommend L'Art du Son Record Cleaning Liquid. One bottle should last about three years for the typical audiophile." THE MUSIC. COM
Learn More£36.00 - RCA Plugs (nextgen) Copper or Silver (WBT-0102)
Contacts utilize passivated pure fine silver. The body is constructed with brass and then platinum plated to give a nice asthetic appeal. The central contact assembly is made of Ultramid® and the negative contact uses Dyneon™.
Learn More£36.91 - Lyra Stylus Performance Treatment
Lyra Stylus Performance Treatment is a purified water-based, non-alcohol stylus cleaner that helps keep cartridge styli scrupulously clean.
Learn More£44.95 - LP12 Armboard pre-drilled for all Origin Live & Rega armsArmboard to fit Origin Live & Rega Arms to the Linn LP12 Learn More£45.00
-
- Upgrade Platter Mat (1mm Thick)
Probably the best low cost, high value upgrade you can make to your turntable regardless of its origin. It adds transparency, dynamics and bass depth. At only 1mm thick it’s easy to install without causing problems. The diameter is 296mm to fit inside the lip of decks such as the LP12 .
Learn More£46.00 - SME Adaptor
Origin Live Adaptor plate to mount all Origin Live and older style (not 3 point mount) Rega arms to any SME armboard mount.
The top of the Origin Live arm plate adaptor sits at 10mm above the surface it is mounted on. This height can be a problem in raising the arm too high. You will normaly need at least 29mm between the top of the platter (including mat) and the top of the arm plate adaptor. Put another way - if you start with the height of an armboard without the Origin Live adaptor, it needs to be 10 + 23mm = 33mm or more below the top of the platter, for the arm to fit happily using the Origin Live armplate adaptor.
The adaptor plate is made of 3mm thick Stainless steel. 8mm spacers, fastening bolts and washers are provided along with an allen key.
Learn More£53.00 - Origin Live Replacement Damping Feet & Pads (Pack of 4)
An excellent upgrade for all audio equipment such as turntables, CD players & amps.
The feet are 30mm in diameter and 30mm in height with an additional 14mm long M6 thread - this can always be cut down if necessary so the the feet can be glued in place or the equipment just rested on the feet.
Learn More£58.00 - Technics Armboard
"This modification makes a good turntable into a variation. So if you're in the market for any new DJ equipment, I can recommend this new Origin Live armboard without any reservation at all. " read more
-Hi Fi World- Click here to view fitting instructions for the technics deck
£63.00 - Sliding VTA Adjuster - adds 13mm to height of arm and thus will not fit most decks
Adds 13mm to height of arm and thus will not fit most decks
The "sliding VTA adjuster" is the best sounding adjuster but adds 13mm to the height of your arm postion due to its thickness. Using this adjuster you can further raise the arm by an additional 20mm.
The sliding VTA adjuster gives infinite adjustment and improves the sound quality. It consists of a sleeve that you can adjust vertically using a grub screw to clamp it in position. The mechanism is similar to the Linn arm height adjustment. It is worth noting that the sleeve clamps the arm in position without damaging its threads. The flange holding the sleeve is fastened onto your armboard using 2 or 3 bolts or screws unequally spaced on a 55mm diameter circle. It needs a mounting hole somewhere between 28mm - 42mm in diameter and is then screwed or bolted to the armboard using 3 fastenings . The overall diameter of the VTA is 70mm.
To work out if your deck will accept the adjuster, allow for the following - The height between the top of your armboard and the top of the platter must be greater than 44mm. If this is the case then the Origin Live VTA adjuster will fit your deck mounted on top of the armboard. The VTA adjuster actually improves performance significantly because it decouples the arm.
Learn More£75.00 - JA Michell Unicover
An essential product to keep your turntable and arm dust free!
Learn More£75.00 - Classic Puritan Audio Mains CablesWith massive 20Amp very high purity copper conductors, optimised dielectric insulation, and vibration absorptive materials technology, combined with Puritan Proprietary Dissipative Technology Shielding, our research has produced a vibrationally “dead”, electrically super silent, powerful conduit, elevating mains cable performance to new heights. Learn More£75.00
- Origin Live Linear Flow 2 Speaker Cable
"it is an extremely ‘right’ sounding at a price that doesn’t leave people gasping for air. Very strongly recommended as a loudspeaker wire, and highly recommended as an interconnect cable" HI FI+ MAGAZINE full review
Learn More£78.00 - Spin Clean Record Washer MkII
The Spin-Clean record washing system removes deeply embeded fine dust from records in a new and inventive way, enabling users to clean both sides of their records at once, without using the turntable as a cleaning platform. With the Spin-Clean® record washing system, you'll help preserve your precious records and stylus.
Learn More£80.00 - To upgrade / repair your existing DC motor kit with replacement Circuit board PCB
All owners of an existing Origin Live DC motor kit can upgrade or repair their boxes by installing a replacement printed circuit board (PCB).
Learn More£0.00 - Project measure it 2 Digital Stylus Force Gauge 2
Not the cheapest on the market but we stopped offering lesser gauges because of the failure rate. This Digital Stylus Force Guage is an excellent touch screen meter and will conveniently read your tracking force with great accuracy. No more fiddling with mechanical stylus balances that stick and can give false readings.
Learn More£90.00 - Tonearm Adaptor for Origin Live & Rega (Old Threaded Base Only) to Allow Mounting to Linn Geometry Armboards
Tonearm Adaptor mount for Origin Live and Rega arms. This is suitible for use on Linn armboards 4mm thick and above.
This mount can also be used for fitting Origin Live arms to armboards thicker than 28mm as the arm is clamped up with a grub screw in the side, instead of the usual nut on the threaded base.
Learn More£90.00 -
- Rewire Rega Arm with Origin Live External Upgrade Cable KIT (you install)
Origin Live External Rewire
Learn More£92.00 - Origin Live Advanced Interconnect Cable
"...Imaging was good...overall tonal balance was excellent...the sound was one that would be easy to live with, day in, day out - confirming the claim for system friendliness."
- Hi-Fi World, May 2001 on Advanced Interconnect
Learn MoreFrom £92.00
To £107.00
-
- Puritan Audio Guardian
The Guardian is an economical way to upgrade an ordinary power strip to a sophisticated, protecting and performance enhancing unit.
The Guardian provides massive surge protection coupled with highly tuned defence elements to purge the interferences that suffocate your audio visual systems signal processing circuits. Installing Guardian will help your system free itself from the electromagnetic clutter that previously stifled its optimum performance.
Learn More£95.00 - Origin Live Soli-Core Basic Speaker Cable
Soli-Core Loudspeaker cable is capable of making an extraordinary difference to your system as the reviews and owner comments indicate. The breathtaking performance of Soli-Core is a no brainer for valve systems which are known to excel with well designed solid core cable. It also works particularly well in systems that need an increase in tight bass.
Learn MoreFrom £98.00
To £864.00