Replace Nottingham Analogue Motor Instructions This motor kit does improve the already good performance of the Nottingham analogue decks by a substantial margin. The kit is relatively easy to fit: Remove the Nottingham Analogue pulley by pulling down the sleeve hard under the motor. There is plenty of room

Michell Orbe Replacement Motor Instructions I had always intended to upgrade my Michel Orbe turntable to a DC motor but had placed it lower on my upgrade agenda. That was until I purchased the Clearaudio speed record and strobe. I measured the speed of the

Michell Gyrodec Replacement Motor Instructions Disconnect all wires. Measure the height from top of rubber belt down to top of gyrodeck pod (10,5mm). This distance is needed when adjusting height of new pulley. Remove rubber belt from pulley. Remove pulley (small screw) Remove nut holding past motor Axel to

Replace Linn Sondek LP12 Lingo/Valhalla Motor Linn Sondek LP12 Turntable set-up and tuning instructions. The Linn LP12 motor is not only very easy to change but is incredibly effective as an upgrade. To fit the DC motor kit to the Linn Sondeck LP12 turntable is very straight-forward

Kuzma Stabi Motor & Power Supply Kit Fitting Instructions Just thought I'd send some pictures as promised of my Kuzma turntable Stabi S with the new motor. It was actually quite easy to fit. First you need to remove the perforated bottom plate to the motor, using

CS Products Modified Rega Planar DC Motor Upgrade Kit The existing motor plate of the CS Products turntable is replaced by an Origin Live motor plate and mounted level with the top of the turntable plinth. The MDF baseboard needs the motor hole enlarging to allow the motor to

Acoustic Research DC Motor Kit This Turntable is fairly straight forward to modify and only needs a single 2.5mm hole drilling in the top plate (which takes all of 30 seconds). Additional parts provided for this DC Motor Kit – 1 off 2.5mm nut, long pulley, no motor top

Will the Motor Kit fit your Record Player? Turntable owners often ask us whether the motor kit will fit their particular deck. The answer is it's probably 98% possible but we cannot provide detailed fitting instructions for every type of deck. Please bear in mind there are well over 3000 different turntable

Record Player Motor and Power Supply general fitting methods Overview of fitting the Record Player motor to your deck Guidance notes are supplied with the kits. These additional notes are provided to overcome issues that may arise on individual decks. Sometimes the depth of a record player motor means

Knowledge Base: DC Motor Kits https://www.originlive.com/key-information/dc-motor-kits-faqs/18634-2/ https://www.originlive.com/key-information/dc-motor-kits-faqs/who-dc-motor-kit-for/ https://www.originlive.com/key-information/dc-motor-kits-faqs/whats-included-dc-motor-kit/ https://www.originlive.com/key-information/dc-motor-kits-faqs/origin-live-dc-motor-kit-unique/